TrustPort Disk Protection Manager

Disk Protection lets you store your files and folders securely in encrypted volume images, which can be mounted and unmounted at any time. Volume images are normal files and can be stored on your hard drive or as read-only volumes on the CD-ROM for instance. You can setup some options of Disk Protection here.

This Manager allows you to set all the TrustPort Disk Protection software options that influence its behavior somehow. Operation is possible in both Easy and Advanced Modes.

  • Advanced Mode

    Serves for operation for users with advanced knowledge. In this interface it is possible to configure all configuration items. Operation is divided into the following sections:

    • Configuration This page contains two tabs, on the first one is separated the unmounting options where you can generally enable or disable the automatic unmounting, set-up the auto-unmount time and affect, whether Disk Protection allows user to force unmount an already mounted image and if it has to ask you for permission an more. On the second one there is a general options of the Disk Protection.
    • Mounts Manager Firstly this page contains Auto-mounts where you can organize the images, which will be automatically mounted during system startup. Secondly it also contains the Recent mounts that allows you to manage recently mounted images and finally the Search tab, which you can use for searching for image files on your local drives or a network.
    • Image editor This powerfull image editation tool allows you to edit a image file, add or remove user accounts, change passwords, increase image size limit, etc.

    You can reach individual settings pages from the tree-like list on the left side of the window. After clicking on one of the configuration sections, the corresponding page is displayed in the right part of the window. Another way to navigate to the configuration section is to click on the respective link on the start page.

    Every configuration change must be confirmed by pressing Apply in order to take effect!

    In the bottom section of the interface, two buttons can be found. In the bottom left corner the button Help can be found which after it has been clicked displays a window with a hint to the given configuration page. The hint will be displayed in the internet browser. By clicking on Easy Mode switches the mode to the default easy mode.

Related references

General options
Unmount options
Mounts manager
Recent mounts
Search for images
Image editor
Main page